Travertino Facade Plaster

Travertino Facade Plaster

TYPE

Specific cement plaster for facades. It contains white cement, inorganic fillers and specific rheological additives.

SCOPE OF APPLICATION:

Travertino is a facade plaster resembling luxury stone coating for exterior application. It has been created to visually reproduce the Travertine stone.

PROPERTY

  • Easy-to-prepare mixture
  • Excellent adhesion to the primer
  • Abrasion resistant
  • Non-toxic
  • Water resistant
  • High steam permeability
  • Ecologically clean product
  • Nonflammable

CONDITIONING OF THE PRIMER

Before application the surface must be dry, hard and well cleaned from dust, greasy spots and unbound particles. In porous beddings and beddings of uneven structure, treatment by DENEL PRIMER must be previously applied.

PREPARATION OF THE MIXTURE

A package of 25 kg is to be stirred together with 5,5 L of water. Into a deep recipient of even walls, the exact quantity of water corresponding to one package must be poured, then the dry mixture must be added  by portions and then it must be stirred using mechanical stirrer till a homogeneous mixture is achieved. This mixture is to be left for some 10 minutes and then it must be stirred again. The so prepared mixture can be used within 3 hours.

APPLICATION

The solution shall be applied using a mortarboard on the primer at one layer, of 1-2 mm of thickness.

DECORATION

Aftyer the application of a layer of the desired thickness, the surface is then treated by a relief pad /grass/. As soon as the layer is dry, an additionally toned transparent latex ProGLAZES is applied thereon which is to be rubbed through using a plastic / rubber stripper or sponge.

RECOMMENDATION

Application is recommended to take place on a dry primer  and at temperature of 5°C to 30°C. After application, the tools must be washed using water.
Addition of other materials is not admitted.

CONSUMPTION RATE

Approximately 1,6 Kg of dry mixture per  1 м² of 1мм of thickness.

SHELF LIFE:     STORAGE

To be stored at dry and ventilated place

TECHNICAL CHARACTERISTICS

Grit        Volumetric density
Compressive strength        BDS  ЕN 1015-11
Tensile strength at bending         BDS  ЕN 1015-11
Capillary water absorbtion        BDS  ЕN 1015-18
Adhesion strength to the primer        BDS  ЕN 1015-12
Water steam passage rate µ (кg/m².s.Ра)        BDS  ЕN 1015-19

R-and-S Phrases
XI IRRITANT
R36/37/38 irritant to eyes, respiratory ducts and skin
R43 possible sensibilization further to skin contacts
Contains cement
Alkali reaction
S2 keep away from children
S22 avoid dust inhalation
S24/25  protect skin and eyes
In the event of contact wash with plenty of water
S26 in case of eye contact ask for medical advice
S36/37 wear suitable protective clothing and gloves
S46 if swallowed seek immediately for medical advice and show the label on the package
S8 protect package from moisture

05
ID № 005 of the Ordinance on Substantial Requirements and Assessments of the Conformity of Building Products
156/13 Feb 2007, and
BDS  ЕN 998-1,2
Test Record
№  
на Building Materials Scientific Research Institute, Sofia

С Є
08    
ЕN 998-1